Combining focused ion beam and atomic layer deposition in nanostructure fabrication

Combining the strengths of atomic layer deposition (ALD) with focused ion beam (FIB) milling provides new opportunities for making 3D nanostructures with flexible choice of materials. Such structures are of interest in prototyping microelectronic and MEMS devices which utilize ALD grown thin films. As-milled silicon structures suffer from segregation and roughening upon heating, however. ALD processes are typically performed at 200–500 °C, which makes thermal stability of the milled structures a critical issue. In this work Si substrates were milled with different gallium ion beam incident angles and then annealed at 250 °C. The amount of implanted gallium was found to rapidly decrease with increasing incident angle with respect of surface normal, which therefore improves the thermal stability of the milled features. 60° incident angle was found as the best compromise with respect to thermal stability and ease of milling. ALD Al 2 O 3 growth at 250 °C on the ga...

Zhongmei Han, Marko Vehkamäki, Markku Leskelä and Mikko Ritala

Click for full article